Garage Door Parts Home Bearings Bearing Plates Bottom Brackets Bottom Seals Brush Seals Cable Drums Cables Center Support Chain Hoists Door Butler Emergency Release Exhaust Ports Fasteners Hinges Door Insulation Keyless Entry Lift Handles Lock Handles Lubricant One Piece Hardware Operator Brackets Operator Parts Parking Wedges Pest Control Pulleys / Sheaves Radio Controls Rollers Rubber Astragal Safety Reverse Shafts Sliding Hardware Solenoid Lock Spring Fittings Springs Stop Moulding Struts Top Roller Carriers Track Degreaser Tracks Truck/Trailer Doors Vee Belts Vinyl Strip Doors Contact Us ShippingReturn Policy Site Map View Shopping Cart

	Yoke-Type Nylon Bearing Hanger for solid wood frame doors up to 400lbs. Vertical and horizontal adjustments. Yoke-type drop straps prevent bolts from loosening. Furnished with bolts for door thickness 1-1/2" to 2-1/4". 2-1/16" wheel diameter
$52.95 Qty.

	Front strap adjustable Steel Ball-Bearing Hanger for solid wood frame doors up to 400lbs. Four 2-1/16 permanently lubricated zinc-plated ball bearings per carrier. Vertical and horizontal adjustments can be accessed through the front strap for fine tuning. For door thickness 1-1/2" to 2-1/4". Overall size 6" x 4" Comes with bolts for doors through 1-3/4" thick
$59.95 Qty.

	Steel Ball-Bearing Hanger for solid wood frame doors up to 400lbs. For door thickness 1-1/2" to 2-1/4". Four 2-1/16 permanently lubricated zinc-plated ball bearings per carrier. Overall size 6" x 4" Comes with bolts for doors through 1-3/4" thick
$56.95 Qty.

	Swivel Ball-Bearing Hanger Drop bolt installs through top frame of door. Vertical and horizontal adjustments (wrench included). Four permanently lubricated ball bearings per carrier.
$49.95 Qty.

	Standard Box Track for doors up to 400lbs. Face or ceiling mounted. Roll formed galvanized steel. Mount with double box track bracket or Single box track bracket.
$35.95 Qty.

	Use this Face Mounted Double Box Track Bracket for bypassing sliding doors up to 2-1/4" thick. Supplied with 3/8" x 2" lag screws. Brackets should be spaced 24" to 30" O.C. 2-1/2" x 1-7/8" x 2-1/2".
$28.97 Qty.

	Face Mounted Single Box Track Bracket are easily installed for single run applications. Supplied with 3/8" x 2" lag screws. Brackets should be spaced 24" to 30" O.C.
$8.97 Qty.

	Heavy-Duty Stay Roll for doors up to 3-3/4" thick. Zinc-plated steel with hard rubber wheel. Installs at base of jamb on each side of door opening.
$22.97 Qty.

	Compact Stay Roll for doors up to 2-1/2" thick. Zinc-plated steel with Lexan wheel. Installs at base of jamb on each side of door opening. Adjustable for doors up to 2-1/2" thick.
$20.50 Qty.

        - Copyright © 2002 - Garage Door Parts Express LLC - All Rights Reserved. - Passaic - New Jersey - 07055 -